You are here

Increased safety lighting fixtures VIXLU series for bi-pin fluorescent tubes feature an IP66 fixture with an AISI 304 stainless steel (AISI 316L on request) body and a tempered shock and high temperature-resistant glass diffuser. This construction method makes them ideal for applications where greater protection is needed against chemically aggressive substances or where there is an elevated risk of accidental physical damage such as in certain areas of the chemical or pharmaceutical industries. They are also ideal for use in paint booths or even more specifically for use in areas where specialised electronic components are made for the aerospace industry. They are recommended for use in highly corrosive environments and in areas where water and dust are present or where there are severe variations in climate. Fluorescent tubes that reach the end of their working lives are monitored and turned off by the EOL (End of Life) safety system in compliance with EN 60079-7. If one of the two tubes stops working, the double channel multi-voltage electronic ballast allows the other to continue working independently. The lighting fixture is closed with 6 clips for the 18W version and 8 clips for the 36W. The clips keep the protective glass hooked to the body of the lighting fixture, making maintenance easier and speeding up fluorescent tube replacement.

Construction

Stainless steel AlSl304 body. Tempered glass diffuser. Closing system with stainless steel clips. Silicone gaskets. Internal frame/reflector in steel white painted. Standard voltage 110/240Vac/dc 50/60Hz. Electronic double channel ballast. Cable gland type REB1IB and two plugs type PLG1IB.


VIXLU
Also available in Spanish
Cortem Group - Lighting and signalling.pdf
Also available in Spanish

Type Description Marking Company Certificate
Atex Lighting fixture
  • II 2 GD Ex e mb IIC T4 Gb
  • Ex tb IIIC T70°C Db
CESI 15 ATEX 037
IEC Ex Lighting fixtures
IECEx CES 15.0019
TR CU Lighting fixture
  • 1Ex e mb IIC T4 Gb
  • Ex tb IIIC T70°C Db
B.01897